Event list, When is it active, 72 event list – ACTi V11 User Manual
Page 72
Encoder Firmware User
’s Manual H1.02.30
Event List
You may define a maximum of 10 Event rules, which will be shown in abbreviated form in the
Event List panel. It will display under each Event ID, the days of the week it will be active, the
start time and duration of the active period, the type of the source of trigger, and the actions used
in the response. If the row is grayed out, this means the rule is currently not enabled and stays
inactive.
For device models with multiple video channels, select first the video channel to configure from
the channel box.
You may start creating a new event by clicking the event ID number in the list, for example
“2”.
There are several parts to the Event rule:
When is It Active?
You may choose to enable the rule or not. The settings will be kept in internal memory even if the
event rule is disabled. Select the days in a weekly cycle in which this rule and schedule is active.
Determine the start time and duration of the active period. For example, a rule that lets motion
detection trigger snapshot uploads to FTP would only take place after 19:00 each day for 12
hours. Outside of this time the rule will not be active.