ACTi V21 - Manual (Page 27)

www.acti.com
Encoder Hardware Manual
27
Double-click the mouse button on the encoder model, the default browser of the PC is
automatically launched and the IP address of the target encoder is already filled in the address
bar of the browser.
If you work with our encoders regularly, then there is even a better way to discover the
encoders in the network – by using IP Utility . The IP Utility is a light software tool that can not
only discover the encoders, but also list lots of valuable information, such as IP and MAC
addresses, serial numbers, firmware versions, etc, and allows quick configuration of multiple
devices at the same time.
The IP Utility can be downloaded for free from http://www.acti.com/IP_Utility .
With just one click, you can launch the IP Utility and there will be an instant report as follows:
You can quickly notice the encoder model in the list. Click on the IP address to automatically
launch the default browser of the PC with the IP address of the target encoder filled in the
address bar of the browser already.