Step 3: install the camera, Step 4: connect the cable(s), Hardware manual – ACTi I51 User Manual
Page 19
Advertising
Hardware Manual
Step 3: Install the Camera
Install the camera using the three (3) supplied screws.
Step 4: Connect the Cable(s)
1.
Connect the bundled network cable to the camera.
If necessary, connect other cable connectors (optional), like audio input/output, DC 12V
power, and DI/DO. See sample image below.
NOTE:
The cables are not included in the camera package.
Network Cable
DC 12V
Power
Audio
Connector
Advertising
This manual is related to the following products: