Event recording with frame rate adjustment, Mnr-310 system administrator ’s manual – ACTi MNR-310 User Manual
Page 78
MNR-310 System Administrator
’s Manual
Event Recording with Frame Rate Adjustment
This mode keeps recording all the way without losing any single moment; lower frame rate can
be set for non-event recording, which consumes only a little storage.
How to Make Use of Event Recording with Frame Rate Adjustment
To make use of
Event recording with Frame Rate Adjustment function
, you may configure
the
Frame Rate
settings on
Setup
page
Device
tab
Video
tab. The
Frame Rate (fps)
you
set will always be applied to live view and schedule recording. Once
Set Frame Rate for
Event Recording Mode
is checked, you may configure advanced settings for event recording.
If the device is in
Dual
stream mode, you will only need to configure these settings of the
Recording Stream
.
Scenario A
:
You wish all the videos are recorded at a very high frame rate. With sufficient storage, you may
not need this function. Set the video
Frame Rate
that will apply to all the recordings. In this
way, the NVR server will not record non-event during event recording period.
Frame Rate Setting
Event Recording
Non-Event: 0 FPS
Event: 30 FPS
1 FPS 1 FPS
30 FPS
Non- event Event Non-event