ACTi Config Converter V1.0.0 - Manual (Page 6)

www.acti.com
ACTi Config Converter User’s Manual
6
Specifications
Config Converter exports device and system properties of NVR 2.3 server into NVR 3.0
server compatible backup format. The following table displays the supported properties being
converted, their original settings paths on NVR 2.3 server, and the corresponding settings
paths on NVR 3.0 server after restoration.
Please note that the conversions of following properties are not supported due to different
NVR system architectures: Joystick settings, License and View settings. Therefore, on NVR
3.0 server, you will have to (1) configure the Joystick properties, (2) customize the Views and
(3) activate additional NVR 3.0 license key if your required channels are over 16.
NVR 2.3 Server Settings Path NVR 3.0 Server Settings Path
Active
Setup
Setup
System
User Roles
Setup
page
Users tab
User Groups
Users Users
Storage
Management
Storage tab
System Settings System tab Settings
Setup
Camera
Camera
Device tab
Basic / Video tab
Motion Video tab
PTZ
PTZ tab
PTZ Preset
Preset Tour Preset Tour tab
Record
Configuration Schedule tab
Schedule
Event Manager Event tab
Config Converter Compatible NVR Server Versions
NVR Enterprise 2.3.03 server or later
NVR Professional 2.3.03 server or later
Config Converter Backup File Compatible NVR Server Versions
NVR 3.0.01 server or later