Airaid 200-142 - Manual

Installation Instructions
For Part Numbers:
200-142
700-451 Airaid Oiled Media Filter
201-142 701-451 SynthaMax Dry Media Filter - Red
202-142 702-451 SynthaMax Dry Media Filter - Black
203-142 703-451 SynthaMax Dry Media Filter - Blue
2004-07 Chevrolet Colorado/GMC Canyon
2006-07 Isuzu i-280/ i-290/ i-350/ i-370
2.8L I4, 2.9L I4 , 3.5L I5, 3.7L I5
Component Identification
1. Airaid Premium Filter 1
2. Black Front Panel 1
3. Black Back Panel 1
4. Weather Strip 23 1/2” 1
5. 6-32x 5/16” Screw 4
6. 6-32 Keps Nut 4
7. #6 Flat Washer 4
1. Disconnect negative battery cable.
Unlatch three clips that hold down the factory
airbox lid. 2. Remove the factory airbox lid, and set it
aside. 3. Remove the factory air filter, and set it
aside.
4. Install the Airaid Premium Filter (#1) on the
factory tube inside the airbox. Make sure the
hose clamp and filter, are tight against the wall
of the airbox, and tighten the clamp. 5. Assemble the Quick Fit panels (#2&#3) using
the four 6-32x5/16” screws (#5), #6 washers
(#7), and nuts (#6). 6. Install the Quick Fit panels by inserting the tab
on the front of the panel into the front slot of the
factory airbox base (A), and then rotating the pan-
els counterclockwise.
7. Make sure the second tab is aligned in the
rear slot of the factory airbox, and then adjust
the Quick Fit panels to fit squarely on top of the
airbox, and then relatch the three factory clips. 8. Install the provided weather strip (#4) on the
top of the Quick Fit panels. For ease of installa-
tion, start next to the fender and work your way
towards the front of the vehicle.
9. Congratulations on installing your new in-
take system! See the back of this page for fur-
ther instructions.
A
Full color instructions can be viewed on our web site at Airaid.com. Use the Product Search function to find your part number, and click View Details.