Airaid 200-215 User Manual
Installation instructions, Component identification
1. Disconnect the negative battery cable.
Using a 5/16” socket or flat screwdriver, loosen
the hose clamp that holds the factory airbox to the
flexible intake tube.
2. With a #20 Torx bit, remove 2 screws holding
the Mass Air Flow sensor to the factory airbox
tube. Remove the MAF and set it aside. Remove
the factory filter minder and grommet from the
factory airbox. Save them for later use in step
#10.
3. Slide the flexible intake tube off of the factory
airbox and then rock the airbox back and forth to
free it from the mounting grommets, then lift it
straight up and remove it from the vehicle.
4. Using a 10mm socket, remove 4 bolts from the
factory airbox mounting plate. Remove the plate
from the vehicle.
5. Assemble the two Cool Air Dam panels (#2)
and (#3) as shown, using the five 6-32 screws
(#10), washers (#11), and nuts (#12).
6. Install the Airaid intake tube (#4) into the Cool
Air Dam using the three 1/4”-20x1/2” button
head bolts (#6), and washers (#7) as shown.
7. Install the supplied rubber trim (#13) onto the
Cool Air Dam as shown.
8. Install the Cool Air Dam into the vehicle
where you removed the factory mounting plate in
step #4, using the four supplied M6-1x25 bolts
(#9), and flat washers (#7).
9. Reconnect the factory intake tube to the Airaid
Intake Tube, and tighten the hose clamp.
Installation Instructions
For Part Numbers:
200-215
720-472 Airaid Oiled Media Filter
201-215
721-472 SynthaMax Dry Media Filter - Red
202-215
722-472 SynthaMax Dry Media Filter - Black
203-215
723-472 SynthaMax Dry Media Filter - Blue
2007-10 Chevrolet Silverado 2500HD/3500HD
2007-10 GMC Sierra 2500HD/3500HD
6.6L V8 Duramax Diesel “LMM”
GMT-900 Platform
Component Identification
1.
Airaid Premium Filter
1
2. MAF Panel
1
3. Rear Panel
1
4. MAF Adapter Tube
1
5. Weather Strip 20 3/4”
1
6.
1/4 -20x1/2” Button Head
3
7.
1/4” Flat Washer
7
8.
8-32x1/2” Button Head Screw
2
9.
M6-1x25 Hex Bolt
4
10.
6-32x 5/16” Screw
5
11.
#6 Flat Washer
5
12.
6-32 Keps Nut
5
13.
Rubber Trim 7”
1
Full color instructions can be viewed on our web site at Airaid.com. Use the Product Search function to find your part number, and click View Details.