Airaid 200-268 - Manual

Component Identification
1. Airaid Premium Filter 1
2. Airaid Intake Tube 1
3. Cold Air Box 1
4. Filter Adapter 1
5. Urethane Hump Hose 1
6. Coupler w/ #68 Hose Clamp 1
7. 3/8”x 8” Breather Hose 1
8. Weather Strip 25” 1
9. 1/4-20 x 1/2” Button Head Bolt 3
10. ¼” Flat Washer 3
11. #64 Hose Clamp 2
12. 1/4 NPT x 3/8 Barbed Fitting 1
13. Edge Clip Cable Tie 1
Installation Instructions
For Part Numbers:
200-268
720-472 Airaid Oiled Media Filter
201-268 721-472 SynthaMax Dry Media Filter - Red
202-268 722-472 SynthaMax Dry Media Filter - Black
203-268 723-472 SynthaMax Dry Media Filter - Blue
2007-08 Chevrolet Silverado 2500HD/3500HD/Suburban 2500
2007-08 GMC Sierra 2500HD/3500HD/Yukon XL 2500
6.0L V8
*New Body Style Only With Mechanical Fan
1. Disconnect the negative battery cable.
Remove the engine cover by simply pulling up on it and
sliding out from the vehicle. 2. Pull the PCV breather line from the Factory intake
tube. 3.A.) Loosen the clamps secur ing the factory intake
tube to the throttlebody and the Mass Air Flow Meter ,
or MAF.
B.) Separ ate the hose anchor fr om the factor y intake
and remove the factory tube.
4. Remove the plastic PCV breather line from the facto-
ry hard line. A standard screwdriver works well for de-
pressing the locking tab in the coupling. 5. Disconnect the MAF sensor and remove the factory
airbox and sensor from the vehicle.
The airbox is secured to the vehicle with grommets and
simply lifts out.
6. Remove the four tray bolts and the airbox mounting
tray. Three of the bolts will be reused in step 8.
7. Secure the wiring harness to the inner fender as
shown using the Edge Clip Cable Tie (#13). 8. Install the Filter Adapter (#4) onto the Cold Air Box
or CAB (#3) as shown using the three 1/4-20 Button
Head Screws (#9) and 1/4” Flat Washers (#10). 9. Install the CAB into the engine compartment and se-
cure using three of the tray bolts from step 6.
A
B
B
C
B
Full color instructions can be viewed on our web site at Airaid.com. Use the Product Search function to find your part number, and click View Details.