Airaid 300-156 User Manual
Installation instructions, Component identification
Installation Instructions
For Part Numbers:
300-156
700-450 Airaid Oiled Media Filter
301-156
701-450 SynthaMax Dry Media Filter - Red
302-156
702-450 SynthaMax Dry Media Filter - Black
303-156
703-450 SynthaMax Dry Media Filter - Blue
2004-08 Dodge Durango
2007-08 Chrysler Aspen
5.7L V8
Component Identification
1.
Airaid Premium Filter
1
2. MAF Panel
1
3.
Front Panel
1
4. Air Filter Adapter
1
5. 3/4” x 25” Hose
1
6. Airaid Intake Tube
1
7. Hump Hose
1
8. Coupler
1
9. Weather Strip 17”
1
10.
6 - 32 x 5/16” Screw
4
11.
#6 Flat Washer
4
12.
6 - 32 Keps Nut
4
13.
¼ - 20 x ½” Button Head Screw
2
14.
¼” Flat Washer
2
15.
Nylon Fitting
1
16.
#24 Speed Clamp
2
17.
Rubber Grommet
1
18.
#60Hose Clamp
4
7. Remove the factory air temperature sensor
from the resonator by turning it counter clock-
wise and pulling it straight out (save for reuse).
9. Assemble the Airaid Quick Fit Panels (#2,
#3) using four 6 - 32 x 5/16” screws (#10), #6 flat washers
(#11), and 6 - 32 keps nuts (#12). Next, install the air
filter adapter (#4) using two ¼ - 20 x ½” button
head screws (#13) and ¼” flat washers (#14).
8. Remove the factory orange seal from the
throttle body.
4. Using a flat blade screwdriver, carefully un-
snap the air box base inlet from the air box base
and remove it. Reinstall the factory air box base
into the engine compartment without the inlet.
6. Remove the oil fill cap from the valve cover.
Using a 10mm socket, loosen the two factory
resonator bolts. Remove the resonator from the
engine and then replace the oil fill cap.
5. Carefully disconnect the factory air tempera-
ture sensor wiring harness from the sensor in the
resonator.
1. Disconnect the negative battery cable.
Remove the valve cover breather hose from the
factory air box lid. Loosen the hose clamps on
both sides of the factory intake tube.
3. Unlatch the clips that secure the air box lid
to the air box base, and remove the air box lid
from the vehicle. Using a 13mm socket, re-
move the air box base from the engine com-
partment.
2. Unsnap the factory intake tube baffle from the
fan shroud and then remove the factory intake
tube assembly from the vehicle.
Full color instructions can be viewed on our web site at Airaid.com. Use the Product Search function to find your part number, and click View Details.