Airaid 300-283 - Manual

Installation Instructions
For Part Numbers :
300-283 720-476 Airaid Oiled Media Filter
301-283 721-476 SynthaMax Dry Media Filter - Red
302-283 722-476 SynthaMax Dry Media Filter - Black
303-283 723-476 SynthaMax Dry Media Filter - Blue
2013-2015 Ram 1500 3.6L V6
2. Remove the two fender bolts in the air box cradle.
The bolts will be reused in step #10 3. Rock the air box back and forth as you are lifting it
straight up to remove it from the vehicle. It is only held in
by grommets.
4. Remove and save four grommets from the bottom of
the factory air box. They will be reused in step #5 5. Transfer the 4 factory air box grommets into the
Airaid Cool Air Box as shown. Note: Two of the holes
do not receive grommets. 6. Transfer the scoop from the factory air box into the
Airaid Cool Air Box as shown.
8. Mount the Filter Adapter and Gasket inside the Cool
Air Box as shown using the three sets of 1/4-20 Button
Head Screws (# 7) and 1/4” Flat Washers (#6). 7. Prepare the Filter Adapter (#3 ) for installation by
mating it to the Adaptor Gasket (# 5) and aligning the
bolt holes. 9. Install the 1/4” Plug (#8) into the Cool Air Box snout
as shown.
Component Identification
1. Airaid Premium Filter 1
2. Cool Air Box 1
3. Filter Adapter 1
4. Weather Strip 32.5” 1
5. Adapter Gasket 1
6. 1/4” Flat Washer 3
7. ¼-20 x 1/2” Button Head Screw 3
8. 1/4" NPT Plug 1
1.Disconnect The Negative Battery Terminal!
Loosen one hose clamp at each end of the air intake tube
and remove it from the vehicle.
Full color instructions can be viewed on our web site at Airaid.com. Use the Product Search function to find your part number, and click View Details.
X
X