Airaid 310-137 - Manual

Installation Instructions
For Part Numbers:
310-137 700-451 Airaid Oiled Media Filter
311-137 701-451 SynthaMax Dry Media Filter - Red
312-137 702-451 SynthaMax Dry Media Filter - Black
313-137 703-451 SynthaMax Dry Media Filter - Blue
2003-06 Jeep Wrangler
2.4L I4
2. Loosen hose clamp attaching air filter assem-
bly to throttle body. Using a ½” socket, re-
move bolt on back side of air filter assembly.
3. Disconnect the breather hose from the factory air
box silencer. (Note: Retain hose for later use.)
4. Remove air filter assembly from engine com-
partment. Retain rubber throttle body coupler for
later use. 5. Using a flat blade screwdriver, unclip the fuse
box from the bracket and set aside. Using
10mm socket, remove bolt from bracket.
(Note: Retain bolt for later use.)
6. Using a 7/16” socket, remove the bolt located on
the radiator fan cover on the passenger side. (Note:
Retain bolt for later use.)
8. Position Airaid Cool Air Dam in place by in-
serting factory radiator support rod through grom-
met as shown. 7. Using the supplied hardware, assemble the two
Airaid panels as shown. 9. Reinstall original bolt through Airaid Cool Air
Dam and factory fuse block bracket. Replace fuse
block on bracket.
Component Identification
1. Airaid Premium Filter 1
2. Cool Air Panel 1
3. Cool Air Panel 1
4. Black Plastic Intake Tube 1
5. Weather Strip 24 ¼” 1
6. ¼-20 Head Cap Bolt 2
7. ¼” Flat Washer 4
8. #6 Flat Washer 4
9. 6-32 Keps Nut 4
10. 6-32 x5/16” Screw 4
11. ¼-20 x ½” Hex Bolt 1
12. ¼-20 Hex Nut 1
13. Grommet 1
1. Disconnect the negative battery cable. Remove
bolt for radiator support rod. (Note: Retain
bolt for later use.)
Full color instructions can be viewed on our web site at Airaid.com. Use the Product Search function to find your part number, and click View Details.