Airaid 310-205 - Manual

Installation Instructions
For Part Numbers:
310-205 700-452 Airaid Oiled Media Filter
311-205 701-452 SynthaMax Dry Media Filter - Red
312-205 702-452 SynthaMax Dry Media Filter - Black
313-205 703-452 SynthaMax Dry Media Filter - Blue
2005-07 Jeep Grand Cherokee
3.7L V6
1. Disconnect the negative battery cable.
Loosen the hose clamp that holds the factory intake
tube to the resonator.
2. Unlatch the two clips on the factory air cleaner box
lid. 3. Disconnect the factory breather tube from the air
cleaner box lid.
4. Remove the air cleaner lid, and factory intake tube
from the resonator box. 5. Remove the factory air filter.
7. Using the 5/16” socket, ratchet and extension (or
flat blade screw driver)- loosen hose clamp on the
throttle body. This clamp is located close to the fire-
wall, in the center of the engine compartment. 8. Remove the factory intake resonator box from the
throttle body by pulling the box towards the radiator
and then lifting up.
9. Assemble the Quick Fit panels as shown, using
five 6-32 screws (#16), #6 washers (#17), and keps
nuts (#18).
Component Identification
1. Airaid Premium Filter 1
2. MAF Panel 1
3. Front Panel 1
4. Air Filter Adapter 1
5. Modular Intake Tube 1
6. Reducer 1
7. Hump Hose 1
8. Weather Strip17” 1
9. 90º Nylon Fitting 1
10. ¼-20x1/2” Button Head Screw 2
11. ¼” Flat Washer 2
12. Rubber Grommet 1
13. #48 Hose Clamp 1
14. #52 Hose Clamp 1
15. #56 Hose Clamp 2
16. 6-32x5/16” Phillips Screw 5
17. #6 Flat Washer 5
18. 6-32 Keps Nut 5
6. Disconnect the intake air temperature sensor wir-
ing harness, by squeezing the tab on the side, and
sliding the connector off.
Full color instructions can be viewed on our web site at Airaid.com. Use the Product Search function to find your part number, and click View Details.