Airaid 350-199 User Manual
Installation instructions
1. Disconnect the negative battery cable.
If you are working on a 5.7L, first remove
the engine beauty cover by lifting it up off of
the grommets. Next, loosen the hose clamp
that holds the factory intake tube to the
throttle body.
6. With a 10mm socket, remove and save
the bolt that holds the factory air filter base
to the radiator support. Remove the air filter
base from the vehicle.
Installation Instructions
For Part Numbers:
350-199
700-469 Airaid Oiled Media Filter
351-199
701-469 SynthaMax Dry Media Filter - Red
352-199
702-469 SynthaMax Dry Media Filter - Black
353-199
703-469 SynthaMax Dry Media Filter - Blue
2006-10 Dodge Charger 5.7L, 6.1L
2005-08 Dodge Magnum 5.7L, 6.1L
2005-10 Chrysler 300 5.7L, 6.1L
2008-10 Dodge Challenger 5.7L, 6.1L
Component Identification
1.
Airaid Premium Filter
1
2. MAF Panel
1
3. Back Panel
1
4. Airaid Intake Tube
1
5. Filter Adapter
1
6. Rear Support Bracket
1
7. Urethane Hump Hose
1
8. Reducing Coupler
1
9. Breather Hose
1
10. Weather Strip 20 1/2”
1
11.
3/8-16 x 1 1/4” Button Head Bolt 1
12.
3/8” Flat Washer
1
13.
¼ - 20 x 1/2” Button Head Bolt
6
14.
¼” Flat Washer
6
15.
1/4” Serrated Nut
3
16.
6-32 x 5/16” Screw
5
17.
#6 Flat Washer
5
18.
6-32 Keps Nut
5
19.
#52 Hose Clamp
2
20.
#72 Hose Clamp
2
21.
Grommet
1
22.
Well Nut
1
7. Assemble the two Cool Air Dam (CAD)
panels (#2, #3) using five 6-32 x 5/16”
screws (#16), #6 flat washers (#17), and 6-
32 keps nuts (#18).
9. Slip the well nut (#22) into the hole in
the inner fender.
8. Next, install the filter adapter (#5) using
three ¼ - 20 x 1/2” button head bolts (#13),
and ¼ flat washers (#14).
3. Pull both lockdown tabs towards you on
the factory airbox lid to remove the lid from
the base.
4. Lift the intake tube towards you, and
without disconnecting the wiring harness,
gently remove the temperature sensor from
the factory intake tube, and set it aside.
2. Disconnect the breather hose from the
factory airbox lid.
5. Remove the factory intake hose and lid
assembly from the vehicle. Remove the
factory air filter.
Full color instructions can be viewed on our web site at Airaid.com. Use the Product Search function to find your part number, and click View Details.