Airaid 350-319 - Manual

Installation Instructions
For Part Numbers:
350-319 720-127 Airaid Oiled Media Filter
351-319 721-127 SynthaMax Dry Media Filter - Red
352-319 722-127 SynthaMax Dry Media Filter - Black
353-319 723-127 SynthaMax Dry Media Filter - Blue
2011-14 Dodge Challenger
2011-14 Dodge Charger
2011-14 Chrysler 300
6.4L V8
2. Disconnect the air temperature sensor. Loosen the
throttle body clamp on the factory intake tube. 3. Separate the crankcase breather from the air box lid
and remove the air box screw in the core support. lift the
air box / tube assembly out of the vehicle and set the
screw aside, it will be reused in step 6.
4. Install the Filter Adapter onto the Cool Air Box using
the three ¼” Button Head Screws and ¼" Flat Washers. 5. Set the Well Nut into the hole in the inner fender. 6. Lower the Air Box assembly down into the inner fend-
er. Align the bolt holes and secure the Air Box using the
screw removed in step 3 and the 3/8” Button Head Screw
with the 5/16” Flat Washer.
8. Transfer the air temperature sensor from the factory
intake tube into the Airaid Intake Tube. 7. Insert the Barbed Elbow Connector into the Airaid
Intake Tube as shown. 9. Place the #56 and #72 Hose Clamps onto the Airaid
Intake Tube and Install the assembly leaving the hose
clamps loose for now.
1. Disconnect the negative battery terminal, located in
the trunk, by the spare tire.
Full color instructions can be viewed on our web site at Airaid.com. Use the Product Search function to find your part number, and click View Details.
Component Identification
1. Airaid Premium Filter 1
2. Airaid Intake Tube 1
3. Cool Air Box 1
4. Filter Adapter 1
5. Weatherstrip 1
6. ¼"-20 Button Head Screw 3
7. ¼" Flat Washer 3
8. 5/16" Flat Washer 1
9. ⅜"-Button Head Screw 1
10 ⅜"-Well Nut 1
11. #18 Speed Clamp 1
12. #24 Speed Clamp 2
13. ¾" Barbed Elbow 1
14. #56 Hose Clamp 1
15. #72 Hose Clamp 1
#56 Clamp
#72 Clamp