Airaid 400-122 - Manual

Installation Instructions
For Part Numbers:
400-122 700-470 Airaid Oiled Media Filter
401-122 701-470 SynthaMax Dry Media Filter - Red
402-122 702 470 SynthaMax Dry Media Filter - Black
403-122 703-470 SynthaMax Dry Media Filter - Blue
1999-03 Ford F-250/F-350 Super Duty 7.3L
V8 **Mfg. 12/08/98 up**
2000-03 Ford Excursion 7.3L V8
*Use Part # 400-131-1 For 2003 6.0L Diesel*
Component Identification
1. Airaid Premium Filter 1
2. Side Panel With Tube 1
3. Rear Box Panel 1
4. Front Box Panel 1
5. Weather Strip 32” 1
6. 6/32 Screw 4
7. 6/32 Nut 4
8. #6 Flat Washer 4
Full color instructions can be viewed on our web site at Airaid.com. Use the Product Search function to find your part number, and click View Details.
I DISCONNECT NEGATIVE (-) BATTERY CABLE.
II Remove air cleaner lid.
a) Unclip air box lid from its base.
b) Loosen clamp from air box lid to intake duct and remove lid.
III Assemble Airaid box.
a) Bolt the Front and Rear Panels to the inside of the Side panel with supplied #6 hardware. FIG#1
b) Unscrew the two-airbox base mounting screws. Leave base in place.
c) Locate Airaid box in place of the original air box lid.
d) Align the four box tab holes over the two factory holes in the base. Reuse the two factory bolts to fas
ten the four tabs to the air box base.
e) Place the cone air filter on intake side of AIRAID assembly and tighten
f) Remove filter monitor from factory air box lid. Remove the grommet.
g) Press grommet in corresponding hole of the AIRAID adapter. FIG#2 & FIG#3
h) Push filter monitor into grommet of the AIRAID adapter. FIG#3
IV Finishing up.
a) Check over all work. Make sure no foreign objects are in the intake path!
b) Reconnect battery cable.
FIG. 1
FIG. 2 FIG. 3