Airaid 200-630-1 - Manual

Parts List
#1 Poweraid Spacer x1
#2 6mmx50mm Bolt x4
#3 6mm Flat Washer x4
#4 Fiber Gasket x2
Tools Required For Installation
5/16”, 10mm Socket
Installation Instructions
Part Number 200-630-1
2008-13 Buick Enclave
2010-1
5 Chevrolet Camaro
2013 Cadillac ATS
2008-13 Cadillac CTS
3.0&3.6L
2008-09 Chevrolet Equinox Sp.
2008-11Chevrolet Malibu
2008-11 Chevrolet Traverse
2008-13 GMC Acadia
2008-09 Pontiac G6 GXP
2008-09 Pontiac G8
2008-09 Pontiac Torrent GXP
2008-09 Saturn Outlook
2008-09 Saturn Vue XR
2008-09 Suzuki XL7
3.6L V6
1. Disconnect the negative battery cable!
Remove the oil fill cap and set it aside.
Lift straight up on the front of the engine beauty cover and set it
aside.
Reinstall the oil fill cap after the beauty cover has been re-
moved to prevent any foreign material from entering the crank-
case.
Thank you for purchasing the Poweraid Throttle Body Spacer. Please read
the instruction manual carefully before proceeding with the installation. Contact
AIRAID @ (800) 498-6951 8:00 AM - 5:00 PM MST Weekdays for questions regard-
ing fit or instructions that are not clear to you. Your Poweraid Throttle Body Spacer
was carefully inspected and packaged. Check that no parts are missing, or were
damaged during shipping. If any parts are missing, please contact AIRAID.
2. Disconnect the breather hose elbow at the hard plastic breath-
er tube. Loosen the two hose clamps that secure the intake tube
to the throttlebody, and the air cleaner lid.
Remove the air intake tube.
These instructions depict an installation being performed on a Chevrolet Camaro and
is meant to be a guide for all other makes and models listed. While specific details may vary
from vehicle to vehicle, the general install procedure remains the same.