Airaid 300-563 - Manual

1
# 300-563 INSTALLATION INSTRUCTIONS
02-04 Dodge Ram 3.7L
Parts List
(1) Power Plate
(1) “O” ring
(3) 6mm x 50mm Hex Head Bolts
(3) 6mm Flat Washers
(1) 1/2”Extension Plate
(1) 1” Extension Plate
(1) 6mm x 20mm Flat Head Screw
(1) 6mm x 35mm Flat Head Screw
(1) 1/4”ID x 3/4”OD x 5/8”OAL
(1) Air Box Flange Nut
(1) Air Box Support Plate
(1) 5/16” x 1 1/2” Flat Head Screw
(1) Throttle Cable Bracket
(2) 3/8”ID x 3/4”OD x .636 OAL
(1) Nutplate w/ 3/8-16” threads
(2) 3/8-16” x 1 1/2” Hex Head Bolts
Tools List
1/4” Ratchet
1/4” x 12” Extension
8mm Socket
10mm Socket
14mm Socket
14mm Box End Wrench
5/32” Allen Wrench
Thank you for purchasing the PowerAid Throttle Body Spacer. Please read the
instruction manual carefully before proceeding with the installation. Contact AIRAID @
(800) 498-6951 8:00 AM - 5:00 PM MST Weekdays for questions regarding fit or in-
structions that are not clear to you. Your PowerAid Throttle Body Spacer was carefully
inspected and packaged. Check that no parts are missing, or were damaged during
shipping. If any parts are missing, please contact AIRAID.
Thank you for selecting AIRAID.
Included with your Poweraid Spacer is a sticker with a California Air Resources Board
(C.A.R.B.) Executive Order (EO) number. This sticker must be placed in plain view inside of
the engine compartment. Failure to do so may prevent you from passing a smog inspection.