Airaid 300-573 - Manual

1
# 300-573 INSTALLATION INSTRUCTIONS
2003-07 Dodge Ram 4.7L
Tools List
1/4 in. Ratchet
1/4 in. x 12 in. Extension
10mm Socket
14mm Socket
14mm Box End Wrench
3/16 Allen Wrench
5/32 Allen Wrench
7/8 Box End Wrench
Parts List
1- Power Plate
1-“O” Ring
3- Bolts 6mm x 60mm
3- Flat Washers 6mm
2– Extension Plates (1 in.) with 6mm Threads
2– Flat Head Screws 6mm x 20mm
1– Air Box Flange Nut
1– Air Box Support Plate
1– 5/16-18 x 1 1/2” Flat Head Screw
1– Cable Bracket
2– Spacers 3/8 I.D. x 3/4 O.D. x .636 Long
2– Hex Head Bolts 3/8-16 x 1 1/2”
1– Nutplate with 3/8” Threads
* Also available for your 2003-05 Dodge Ram
4.7L- the Airaid Intake System P/N 300-125-1
and the Modular Intake Tube P/N 300-925-1.
Call for details!
Thank you for purchasing the PowerAid Throttle Body Spacer. Please read the
instruction manual carefully before proceeding with the installation. Contact AIRAID @
(800) 498-6951 8:00 AM - 5:00 PM MST Weekdays for questions regarding fit or in-
structions that are not clear to you. Your PowerAid Throttle Body Spacer was carefully
inspected and packaged. Check that no parts are missing, or were damaged during
shipping. If any parts are missing, please contact AIRAID.
Thank you for selecting AIRAID.
Included with your Poweraid Spacer is a sticker with a California Air Resources Board
(C.A.R.B.) Executive Order (EO) number. This sticker must be placed in plain view inside of
the engine compartment. Failure to do so may prevent you from passing a smog inspection.