Airaid 310-508 - Manual

1
# 310-508 INSTALLATION INSTRUCTIONS
2004 -06 Jeep Liberty 3.7L
Parts List
(1)- Power Plate
(1)- “O” Ring #238
(1) Throttle Cable Bracket
(2) 3/8”ID x 3/4”OD x .636 O.A.L. Spacers
(1) Nutplate with 3/8-16” threads
(2) 3/8-16” x 1 1/2” Hex head bolts
(3) 6mm x 50mm Hex Head Bolts
(3) 6mm Flat Washers
Tools List
Flat Head Screwdriver
14mm Socket
10mm Socket
8mm Socket
Ratchet & Extension
Thank you for purchasing the PowerAid Throttle Body Spacer. Please read the
instruction manual carefully before proceeding with the installation. Contact AIRAID @
(800) 498-6951 8:00 AM - 5:00 PM MST Weekdays for questions regarding fit or in-
structions that are not clear to you. Your PowerAid Throttle Body Spacer was carefully
inspected and packaged. Check that no parts are missing, or were damaged during
shipping. If any parts are missing, please contact AIRAID.
Thank you for selecting AIRAID.
Included with your Poweraid Spacer is a sticker with a California Air Resources Board
(C.A.R.B.) Executive Order (EO) number. This sticker must be placed in plain view inside of
the engine compartment. Failure to do so may prevent you from passing a smog inspection.