Airaid 310-509 - Manual

1
# 310-509 INSTALLATION INSTRUCTIONS
03-07 Jeep Grand Cherokee 4.7L
* Also available for your 99-04 Jeep Grand
Cherokee– the Airaid Intake System P/N 310-
127.
Parts List
(1)- Power Plate
(1)- “O”-Ring #240
(3)- Hex Bolts 6mm x 60mm
(5)- Flat Washers 6mm
(2)- Air Box Extension Plates
(2)- Hex Bolts 6mm x 20mm
(1)- Throttle Cable Bracket
(2) .636 long w/ 3/8” hole Spacers
(2) 3/8-16 x 1 1/2” bolts
(1) Nutplate
Tools List
1/4 in. Ratchet
1/4 in. x 12 in. Extension
8mm Socket
10mm Socket
14mm Socket
14mm Box End Wrench
3/16 Allen Wrench
5/32 Allen Wrench
7/8 Box End Wrench
Thank you for purchasing the PowerAid Throttle Body Spacer. Please read the
instruction manual carefully before proceeding with the installation. Contact AIRAID @
(800) 498-6951 8:00 AM - 5:00 PM MST Weekdays for questions regarding fit or in-
structions that are not clear to you. Your PowerAid Throttle Body Spacer was carefully
inspected and packaged. Check that no parts are missing, or were damaged during
shipping. If any parts are missing, please contact AIRAID.
Thank you for selecting AIRAID.
Included with your Poweraid Spacer is a sticker with a California Air Resources Board
(C.A.R.B.) Executive Order (EO) number. This sticker must be placed in plain view inside of
the engine compartment. Failure to do so may prevent you from passing a smog inspection.