Airaid 400-623 - Manual

Parts List
#1 Poweraid Spacer x1
Tools Required For Installation
7/16” Deep Socket & Ratchet
Or
7/16” Wrench
Installation Instructions
Part Number 400-623
Poweraid Spacer For
2008-09 Ford
F-250 Thru F-550
6.4L Powerstroke
1. Disconnect the negative battery cable!
Using a 7/16” deep socket or wrench, loosen the hose clamp that secures
the silicone coupler to the aluminum intercooler tube. Slide the hose clamp
down the aluminum tube for safe keeping. Pull the intercooler tube up and
out of the silicone coupler to install the Poweraid Spacer.
Thank you for purchasing the Poweraid Throttle Body Spacer. Please read the in-
struction manual carefully before proceeding with the installation. Contact AIRAID @ (800)
498-6951 8:00 AM - 5:00 PM MST Weekdays for questions regarding fit or instructions that
are not clear to you. Your Poweraid Throttle Body Spacer was carefully inspected and
packaged. Check that no parts are missing, or were damaged during shipping. If any
parts are missing, please contact AIRAID.
Thank you for selecting AIRAID.
Silicone Coupler
Hose Clamp