Airaid 300-786 - Manual

Installation Instructions
For Part Numbers:
300-986 Modular Intake Tube
300-786 Jr. Kit 850-357 Airaid Oiled Media Filter
301-786 Jr. Kit 851-357 SynthaMax Dry Media Filter - Red
2013-15 Ram 2500/3500
6.7L Cummins Diesel
2. Disconnect both of the air sensors in the airbox top. 3. Gently pry the harness anchor out of it’s tab on the
airbox and free the wire harness.
4. Loosen the intake clamp at the turbo inlet and re-
move the intake tube assembly. 5. Slide the Airaid intake tube into the turbo inlet but
leave the clamp loose for now.
6. If you are installing an Airaid Jr. kit, install the Airaid
Premium Filter at this time.
7. Slide the Hump Hose and clamps onto the Airaid
Intake tube as shown.
Component Identification
1 Airaid Premium Filter 1
2 Airaid Intake Tube 1
3 Hump Hose 1
5 Hose Clamp 2
1.Disconnect The Negative Battery Terminals!
Warning: Installation of this Intake system requires
working in close proximity to the turbocharger. Please
allow a sufficient cooling time before beginning the in-
stallation to avoid personal injury.
Full color instructions can be viewed on our web site at Airaid.com. Use the Product Search function to find your part number, and click View Details.
3. Loosen the clamp on the intake tube and remove the
airbox lid from the vehicle.
9. Slide the airbox outlet into the Hump hose and re in-
stall the airbox lid.