Airaid 300-944 - Manual (Page 3)

10. Install the supplied rubber
grommet and factory air
temperature sensor into the
Airaid intake tube. Then,
reconnect the factory electrical
connector onto the sensor. Lastly,
reconnect the factory breather
hose to the air box lid.
11. If you purchased the Airaid Jr.
Kit P/N 300-744, replace the
factory air filter with the Airaid
Premium Filter included in the
Kit.
12.
Double check your work to be
certain that all nuts, bolts, and
clamps are securely fastened.
13.
Reconnect the negative battery
cable.
Before
After!