Airaid 1002 User Manual
Part number 1002
Parts List
#1 ECONOAID
x1
#2 Gasket
x2
1. Disconnect the negative battery cable!
Using a 10mm socket, remove three bolts, and the engine
beauty cover. Next remove the air intake tube between the
throttlebody and the air filter housing.
2. Remove the four bolts that hold the throttlebody to the in-
take manifold.
Thank you for purchasing the ECONOAID Throttlebody Booster. Please read the instruction manual carefully before pro-
ceeding with the installation. Contact ECONOAID @ (888) 876-4676 8:00 AM - 5:00 PM MST Weekdays for questions regarding fit
or instructions that are not clear to you. Your ECONOAID Throttlebody Booster was carefully inspected and packaged. Check that
no parts are missing, or were damaged during shipping. If any parts are missing, please contact ECONOAID.
Tools Required For Installation
5/16”, 10mm Sockets
Ratchet and Extension
Part Number 1002
1997-03 Ford F-150 5.4L
1997-04 Expedition 5.4L
1999-04 Ford Super Duty 5.4L
1997-06 Ford F-150 4.6L
1997-04 Expedition 4.6L
(Does Not Fit 2004 F-150 Heritage Model)
U.S. Pat. #7,665,442