Airaid 1011 - Manual

Parts List
#1 ECONOAID x1
#2 Gasket x1
1. Disconnect the negative battery cable!
Using a 5/16 socket, loosen the two hose clamps that secure the
air intake tube between the airbox lid and the resonator. Re-
move the tube from the vehicle. Next, squeeze the tab, and dis-
connect the air intake temperature sensor wiring harness on the
rear corner of the resonator. 2. A.) Using a 10mm socket, remove the two bolts that secure
the resonator to the engine. B.) Using a 5/16” socket, loosen the
hose clamp that secures the rubber coupler on the back of the
resonator to the throttlebody. Lift the front of the resonator
straight up to disengage it from the mounting grommet, and
remove the resonator assembly from the vehicle.
Thank you for purchasing the ECONOAID Throttlebody Booster. Please read the instruction manual carefully before pro-
ceeding with the installation. Contact ECONOAID @ (888) 876-4676 8:00 AM - 5:00 PM MST Weekdays for questions regarding fit
or instructions that are not clear to you. Your ECONOAID Throttlebody Booster was carefully inspected and packaged. Check that
no parts are missing, or were damaged during shipping. If any parts are missing, please contact ECONOAID.
Tools Required For Installation
5/16”, 10mm Sockets
Ratchet and Extension
Part Number 1011
2003-07 Dodge Ram
2003-06 Dodge Dakota
2003-06 Dodge Durango
2003-06 Mitsubishi Raider
4.7L V-8
A
A
B
U.S. Pat. #7,665,442