Airlink AME001 - Manual (Page 44)

43
A
PPENDICES
Appendix A: Caller ID Commands (Optional)
+VCIDn - Caller ID (Enables or disables Caller ID.)
This command only apply to models which support the Caller ID function.
+VCID=0 Disables Caller ID.(Default.)
+VCID=1 Enables Caller ID with formatted presentation to the DTE. The modem will
present the data items in a <Tag><Value> pair format. The expected pairs are
data, time, caller code (telephone number), and name.
+VCID=2 Enables Caller ID with unformatted presentation to the DTE. The modem
will present the entire packet of information, excluding the leading U's, in
ASCII printable hex numbers.
Result Codes:
OK n=0, 1 or 2.
ERROR Otherwise.
Inquiries :
+VCID? Retrieves the current Caller ID mode from the modem.
+VCID=?
Returns the mode capabilities of the modem in a list with each element
separated by commas.
Formatted Form Reporting
The modem presents the data in the <tag>=<value> pair format as described in the table
below.Spaces are present on both sides of the equal sign.
TAG Description
DATE DATE=MMDD where MM is the month number(01 to 12) and DD is the day
number (01..31).
TIME TIME=HHMM where HH is the hour number (00 to 23) and MM is the minute
number (00 to 59).
NMBR NMBR=<number> or P or O where <number> is the telephone number of the
caller, where P indicates that the calling number information is not available
since the originating caller as requested private service, and where O indicates
that the calling number information is not available or out of service at the
calling location.
NAME NAME=<listing name> where <listing name> is the subscription name.
MESG MESG=<data tag><length of message><data><checksum> in printable ASII
hex numbers. This tag indicates a data item not listed above. The message is
only possible for Multiple Message Format.
Notes:
1.
The modem does not present any Caller ID information if the DCE detects a checksum
error in the Caller ID packet.
2. In the event of an unrecognized data tag, the modem will present the data in ASCII hex
numbers following the MESG tag.
Example of Formatted Form Reporting
1. The following example illustrates the standard Caller ID message packet.
RING
DATE = 0321
TIME = 1405
NMBR = 504551234
NAME = A N OTHER
RING
RING
2. The following example illustrates the case where the tag of the packet is not recognized
by the modem.
RING