Airlink WLC010 User Manual
Page 35
11Mbps Wireless LAN PC Card User's Manual
Connecting to Access Points (Infrastructure)
To connect your computer to an Infrastructure network, complete the following steps:
1. In the systray area, click the Wireless LAN Link Status icon
to display the Wireless LAN Configuration Utility dialog box.
If the wireless icon does not display in the systray area,
click Start -> Programs -> PRISM 802.11 -> Configuration Utility.
2. Click the Configuration tab.
3. In the Mode list, click Infrastructure.
4. In the SSID list, click or enter SSID name of the Access Point.
All wireless clients must use the same SSID in order to communicate with each other.
5. Click Apply Changes. Click on the Link Info Page, you will see the status
“Associated-BSSID=xx.xx.xx.xx.xx.xx”.
6. Click OK if you wish to exit the utility.
30