Inserting and removing diskettes – Epson 10020 User Manual

Page 52

Advertising
background image

If you have the Apex 100\20, follow these additional

precautions to protect your hard disk drive and its data:

Never turn off the computer when the hard disk drive light

is on. This light indicates that the computer is copying data

to or from the hard disk. If you interrupt this process, you

can lose data.

Never attempt to open the hard disk drive. The disk itself

is enclosed in a sealed container to protect it from dust.

If you need to move the computer, be sure to run the

HDSIT program before you turn it off. See “Preparing the
Hard Disk for Moving,” later in this chapter.

Inserting and Removing Diskettes

To insert a diskette into the drive, hold it with the label facing up

and the read/write slot leading into the drive, as shown below.

Slide the diskette into the slot until it is in all the way. Then
turn the latch down to lock it in a vertical position. This keeps
the diskette in place and enables the read/write heads in the

disk drive to access the diskette.

Using Your Computer

2-11

Advertising