Extron Electronics P-2 DA1 User Manual

P/2 da1, User’s guide

Advertising
background image

Extron Electronics, USA

1230 South Lewis Street
Anaheim, CA 92805
USA
714.491.1500
Fax 714.491.1517

Extron Electronics, Europe

Beeldschermweg 6C
3821 AH Amersfoort
The Netherlands
+31.33.453.4040
Fax +31.33.453.4050

Extron Electronics, Asia

135 Joo Seng Road, #04-01
PM Industrial Building
Singapore 368363
+65.6383.4400
Fax +65.6383.4664

Extron Electronics, Japan

Kyodo Building
16 Ichibancho
Chiyoda-ku, Tokyo 102-0082 Japan
+81.3.3511.7655
Fax +81.3.3511.7656

www.extron.com

© 2006 Extron Electronics. All rights reserved.

User’s Guide

VGA Line Driver

68-480-01 Rev. C

07 06

P/2 DA1

Nominal level .................................. 0.7 Vp-p for RGB
Minimum/maximum levels ......... Analog: 0.3 VDC to 1.5 VDC p-p with no

offset at unity gain

Impedance ........................................ 75 ohms
DC offset ........................................... ±5 mV maximum with input at 0 offset

Output resolution may vary depending on whether the P/2 DA1
is attached to the computer at startup, and on the type of
computer you are using.

Sync

Input/output type .......................... RGBHV, RGBS, RGsB, RsGsBs
Input level ........................................ 2.0 V to 5.0 Vp-p
Output level ..................................... TTL: 5 Vp-p
Input impedance ............................. 510 ohms
Output impedance .......................... 75 ohms
Max. propagation delay ................. 18.8 ns
Max. rise/fall time .......................... 4 ns
Polarity .............................................. Positive or negative

General

Power ................................................ 100 to 250 VAC, 4 watts, maximum, external,

attached

Temperature/humidity ................. Storage: -40 to +158 °F (-40 to +70 °C) /

10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) /
10% to 90%, noncondensing

Rack mount ...................................... No
Enclosure type ................................. Plastic clamshell
Enclosure dimensions .................... 0.6" H x 1.3" W x 3.1" D

1.4 cm H x 3.3 cm W x 7.9 cm D

Product weight ................................ 0.5 lb (0.3 kg)
Shipping weight .............................. 1 lb (1 kg)
Vibration ........................................... ISTA 1A in carton

(International Safe Transit Association)

Listings .............................................. UL, CUL
Compliances .................................... CE
MTBF ................................................. 30,000 hours
Warranty ........................................... 3 years parts and labor

Part Number

P/2 DA1, 100 to 250V ..................... 60-319-02

All nominal levels are at ±10%.

Specifications are subject to change without notice.

Advertising
This manual is related to the following products: