All Power APG3560CN - Manual (Page 16)

15
Assembly
Wheel and handle assembly:
1) CONTENTS: Spark plug Tool +
Rod, 2 axles, 2 washers, 4 cotter
pins, 2 wheels, Stand, 4 bolts 4
nuts, and Propane line. 2) Thread nut thru stand and
frame of the generator.
3) Thread the nuts onto the bolts. 4) Install axle and push cotter pin thru
hole in frame and axle.
5) Install wheel and washer. 6) Install cotter pins.
Ownerʼs Manual