Owner’s manual, Battery – All Power APG3590CN User Manual
Page 17
To start generator with electric start you will need a battery (included). You can also use a 12v
lawn tractor battery with the following specifications: The dimensions are Wx7.5” Dx5” Hx7”
(including terminals). A rated cranking amperage of 200. Terminals are regular, not reversed.
Note: (a) Using a battery not designed for this unit may void warranty,
(b) Battery must be charged recommended using one month;
(c) Do not touch uninsulated battery terminal;
(d) A lead-acid battery generates explosive gases during normal battery. So never smoke or
allow an open spark or flame in the vicinity of the battery and engine;
(e) The method of battery connecting: Connecting the positive clip (red) from charging loop to
positive clip (+) ungrounded post of battery.
Connecting the negative (-) grounded (black) charging loop.
(f) Must connect charging loop to the battery before engine runs. Forbid connecting it while
engine is running.
(g) Also this generator can be started with the pull start.
Photos below demonstrate battery plate attachment.
1) Bolt on plate with M6X40 bolts as shown below.
2) Put the battery on the frame, have the battery assembled with the provided accessories as
shown.
Accessories
M6x40
M6 Nut
Battery
Owner’s Manual
Battery
17