Amped Wireless SR600EX - High Power Wireless-N 600mW Pro Range Extender User Manual
Page 47
SR600EX
USER’S GUIDE
46
Troubleshooting
The tips in this guide are listed in order of relevance. Try solution (a) before trying solution (b) etc…
I entered setup.ampedwireless.com and it failed to open the Web Menu.
a. Make sure your computer is connected to the Pro Smart Repeater/PoE Adapter using the included
Ethernet cable. Make sure your computer is NOT connected to ANY wireless networks. Disconnect
your computer from any wireless networks and try to access the web menu again.
b. Close your current web browser and reopen it. Try the web address again.
c. Try to use a different web browser. We recommend the Google Chrome web browser.
d. Try to open your web browser to the default IP address by putting this number into your web browser
instead: 192.168.1.240
e. Power off (unplug the power adapter) the Pro Smart Repeater and power it back on. Try again.
f. Reset your Pro Smart Repeater to default settings by holding the Reset Button (located on the back of
the PoE Adapter) for five to ten (5-10) seconds and try again