Aqua Lung Pearl BC User Manual

Page 19

Advertising
background image

English

© 2012 Aqua Lung International

ADJUSTING THE WAISTBAND LENGTH - HOOK AND LOOP SYSTEM

Lay your BC so that the front of the BC is facing you. Disconnect the waistband buckle, the waist-

band, and shoulder straps so you have open access to the back pad.

1. There is a retaining flap located on the bottom

backside of the back pad. Disconnect the flap and

lift up the back pad to expose the waistband.

2. For each side of the waistband, detach the

hook & loop and adjust to the desired position,

then re-secure the hook & loop. The hook and

loop must overlap a minimum of four inches, but

not extend past the end of the loop.

3. Re-secure the back pad and try on the BC to make sure the waistband length is correct. Repeat

this procedure until the proper length is achieved.

Advertising
This manual is related to the following products: