Aqua Lung WTX Buoyancy System - Manual (Page 32)

ADJUSTING THE CROTCH STRAP
The crotch strap is adjusted by moving the 2 inch webbing through the 3-bar slide near the back. The
crotch strap should be tried on and adjusted while wearing your exposure suit. The strap should be
lightly snug but not so snug as to prevent you from raising your arms above your head. Excess strapage
can be cut with scissors and the end burned with a lighter to prevent unraveling, or it can be tucked
into the elastic retainer loop.
NOTE: Do not cut the excess webbing so short that you cannot enlarge it in the future to
compensate for a thicker exposure suit.
CUSTOMIZING THE SHOULDER HARDWARE
1. Remove epaulets from the shoulder strap webbing.
2. Unweave webbing from 3-bar plastic slide and rectangular
plastic loop.
3. Remove 3-bar plastic slide from webbing. Pull webbing out from sewn-in shoulder strap loop.
4. You now have the ability to add or remove hardware according to your needs.
To open up the shoulder webbing:
© 2014 Apeks
Table of Contents