Aquatic AV AQ-BC-5BT - Manual (Page 4)

+12V DC (4)
No lower than a 2 Ohm load should be used
or damage may occur to the BlueCube Media
Player.
Make sure the polarity of speakers are
connected correctly.
Power Antenna (7)
Fuse Box
No lower than a 2 Ohm load should be used
or damage may occur to the BlueCube Media
Player.
Make sure the polarity of speakers are
connected correctly.
(White/strip)
(Yellow color)
(Red color)
The AQ-BC-5BT includes the universal harness AQ-UNH-2 in order to connect the BlueCube to
power and speakers.
All open wire connections should be soldered and protected against water and dust for best long
term performance.
1.3 12-pin Harness Connection
1. Make sure the outside surface is clean and
clear of debris.
2. The BlueCube Media Player has four (4)
front screws. Drive the screws using a screw
driver. Make sure screws are snug and do not
over tighten.
1.4 Mounting the BlueCube Media Player
195mm
119mm
127mm
59mm 46mm
Getting Started
BlueCube Media Player AQ-BC-5BT
www.aquaticav.com 4