Aq -d m -4, Listening to fm radio, Location of controls – Aquatic AV AQ-DM-4B User Manual

Page 8

Advertising
background image

7

www.aquaticav.com

LISTENING TO FM RADIO

ENTER FM RADIO MODE

TO SCAN OR NAVIGATE CHANNELS

FM radio is only available when you are in the FM Radio Mode.

If this is the first time you listen to FM radio, the default frequency will be 87.5MHz, as

shown on the remote LCD.

SAVING RADIO CHANNEL TO MEMORY

LISTENING TO SAVED RADIO MEMORY

1. Press (FAST REWIND) or (FAST FORWARD) to seek another station.

2. Press and hold either (FAST REWIND) or (FAST FORWARD) for manual tun-

ing back or forward.

1. Press or or button once to listen to the station stored in button.

1. Press (MODE) on remote control to switch to FM radio model.

1. If you want to save the current frequency into memory, press and hold or or
for more than 2 seconds. The station will be stored the to relevant button or or

LOCATION OF CONTROLS

A

Q

-D

M

-4

4

www.aquaticav.com

WATER/DUST PROOF DIGITAL MEDIA LOCKER

Digital Media Locker Knob and Protective Door

ON/OFF Button

Water/Dust Protection Inner Gasket

3.5mm AUX Input Jack for MP3 Devices

ON/OFF Power LED

Security Strap for Digital Media Devices (MP3/iPod)

iPod 30-pin Connector

Item Description

1.

2.

3.

4.

5.

6.

7.

SWITCH BETWEEN US & EURO FM MODES

US mode will increase and decrease the FM frequency in steps of 0.1 MHz, e.g. 88.5,

88.6, 88.7 MHz. EUR mode will increase and decrease the FM frequency in steps of

0.05 MHz, e.g. 88.25, 88.30, 88.35 MHz.

1. Make sure dock and remote are turned on and in ‘RADIO’ mode.

2. Hold down the (AUDIO) button for 3-5 seconds.

3. The remote will display ‘AREA USA’ or ‘AREA EUR’ depending on which tuning mode is

currently selected.

4. Use the +/- arrows to switch between US or European modes.

5. Press (PLAY/PAUSE) to select the desired tuning mode.

6. Once you switch modes it will default to the FM station stored in ‘PRESET 1’.

Advertising