Aquatic AV AQ-PSx-1 - Manual (Page 3)

INSTALLATION
3
www.aquaticav.com
AQ-PSx-1
1. Disconnect the AC input power before installing your new power supply.
2. Make sure the power supply has the correct connection for your input power source.
3. Secure the power supply using four screws and the mounting holes in the power
supply end plates.
4. Connect the 12V DC power output cables (red and black wires, male and female
spade) to the stereo DC input.
5. Make sure all connections are secure. If you are not sure contact a qualified
electrician. Do not take any risks - incorrect installation can cause severe injury or
death.
6. Turn on the AC power and the power supply should be functional.
INSTALLATION