Northfire 42, 27 maintenance – Archgard 42-DVT40N User Manual
Page 27
Northfire 42
27
MAINTENANCE
CAUTION
:
Do not conduct maintenance on the appliance while it is operating or while it is still hot.
The exterior painted surfaces, glass and gold trims may be cleaned with a soft, non-abrasive
cloth and water or a suitable, mild, non-abrasive cleaner.
Regularly:
•
Clean and remove any lint accumulations or debris from the grills and in any
combustion and convection air passage ways.
•
Keep the appliance area free from combustible materials, such as paper, wood,
clothing, gasoline and flammable solids, liquids and vapors.
•
Visually check the height and color of the burner and pilot flames.
Every 2 to 3 months:
•
Remove the glass door and clean the inside of the glass with a soft, non-abrasive
cloth and water or a suitable, mild, non-abrasive cleaner. DO NOT CLEAN WHILE
HOT.
•
Carefully remove the logs and gently brush off any loose carbon deposits. This job is
best done outside the house, wearing a dust mask.The logs are very fragile, take
care not to break them. Do not wash logs with any liquid. While logs are removed,
also remove the coals and “embers” and check that all burner openings are not
obstructed. It is recommended you use a vacuum cleaner to clean off any dust or lint.
•
After cleaning, the logs, coals and embers must be replaced as per the instructions in
this manual.
Once a year, have a qualified service technician:
•
Completely inspect the appliance and the venting system. Vent connection can be
checked by removing the vent baffle in the firebox. Remove the five ¼ hex head
screws holding the baffle. Replace baffle after inspection.
•
Clean and remove any lint accumulations or debris in the firebox, on the burners,
on the pilot, at the primary air opening, on the convection air blower and in any
combustion and convection air passage ways.
•
Check the safety system of the gas valve and the appliance.
WARNING : All parts removed or disturbed including guards and grills must
be properly replaced after maintenance. Service and repair must
be conducted by a qualified service person. If these instructions
are not followed, a fire or explosion may result, causing property
damage
, personal injury or loss of life.
CLEANING THE APPLIANCE