ARM Electronics C600BCDNVFIR - Manual (Page 5)

- 3 -
(600TVL) 2D-DNR DAY & NIGHT COLOR CAMERA
* RETURN: Select Return to save the changes in the EXPOSURE menu and return to the SETUP menu.
D-WDR OFF D-WDR ON
White Balance
The White Balance function is used to control the “on-screen” colors.
1. Move the arrow indicator to WHITE BAL on the SETUP menu screen using the Up and Down button.
2. Select the desired mode by using the Left or Right button.
* There are three user's selectable White Balance settings.
* ATW1 : (Auto Tracking White Balance)
Normal setting; when the color temperature range is from 1,800˚K to 10,500˚K. (Ex: a fluorescent lamp or outdoors)
* AWC → SET : To obtain the best results press the SET button while the camera is focused onto white paper.
If the environment, and/or light source changes, the White Balance will require re-adjustment.
* MANUAL : Used for fine adjustment of White Balance. Set White Balance first using ATW1 or AWC then
change to MANUAL and press SETUP button. Increase or decrease the value of R-Gain(Red)
and B-Gain(Blue) while monitoring the color of the image.
 OUTDOOR / INDOOR / MANUAL selectable.
SETUP
LENS
EXPOSURE
WHITE BAL.
BACKLIGHT
DAY&NIGHT
DPC
SPECIAL
RESET
EXIT
AUTO
ATW1
OFF
DC