ATL Telecom IP250 - Manual

Guarantee
Your IP 250 is designed and manufactured to exacting quality standards. This enables ATL telecom
Limited to offer a 1 year guarantee from the date of purchase. This guarantee protects against faulty
material or workmanship, and applies to the UK only and is not transferable.
The terms and conditions under which the guarantee will be valid are as set out below.
Misuse or any modification carried out to the telephone, or operation other than in accordance with the
instructions supplied, will invalidate the guarantee.
Damage arising from incorrect installation, accidental damage or consequential loss, are not covered
under the guarantee.
In the event of a fault developing during the period of the guarantee, the complete telephone should be
returned to your supplier, adequately and safely packed, together with the proof of purchase.
The liability of ATL telecom Limited will be limited to the cost of repair or complete replacement of the
same defective instrument, at the discretion of the company. In the event that the same item is not
available, a suitable alternative will be offered.
The terms of this agreement do not affect your statutory rights.
Manufacturers Declaration*
ATL telecom Limited declares that this product is in conformity with the essential requirements of the
R & TTE directive 1999/5/EC.
*A copy of the Declaration of Conformity is available, upon request, from ATL telecom Limited.
ATL Telecom Limited,
Fountain Lane
St Mellons,
Cardiff. CF3 0FB
technical support
Tel: +44 (0) 29 2050 0799
Email: [email protected]
www.atltelecom.com
1/429/001/611 Issue 1 Oct 2006
atl iP 250
Quick start Guide
Thank you for purchasing your ATL IP 250 VoIP telephone. Before you start you will need to obtain the
SIP service information from your Internet Telephony Service Provider (ITSP) or IT Department in order
for the telephone to be set up correctly.
contents
Your ATL IP 250 package should contain the following items:
An IP 250 Base Unit
An IP 250 Handset
A Handset Cord
A LAN Cable
UK Style Mains Adapter ( not supplied with PoE version 1/429/151)
Quick Start Guide
Note: The latest revision of the Quick Start Guide and the full user guide can be found on the website
http://www.atltelecom.com
►
►
►
►
►
►
Power suPPly aDaPter
Your IP 250 phone is supplied with a 12Vdc mains adapter (but it also supports PoE provided the IP
switch it is connected to can provide PoE and you have purchased version 1/429/151) . It is important to
note that the use of an alternative mains adapter will void the guarantee, may result in damage to your
IP 250 phone and may present a potential safety hazard.
settinG uP your Berkshire iP 250 telePhone
connecting your Berkshire iP 250
1. Connect the Handset to the IP 250 Base unit using the Handset Cord provided in the
box.
2. Plug one end of the LAN cable provided into the port marked “LAN” on the IP 250 Base
Unit located at the rear of the phone.
►
►
recoMMenDeD connection sPeeDs
ATL recommends an Internet connection speed of at least 256kbps upload and 512kbps download in
order to ensure optimal call quality. Please note that the connection speed required will vary depending
on the number of computers/IP phones using a single connection.
safety inforMation
It is important to read all safety notices before installing or using your IP 250 phone, it is essential for the
safe and reliable operation of the product.