ATL Telecom Telex - Manual (Page 12)

R) PRINTER COMPULSORY: 0)No 1)Yes <0>
S) DROP CARRIER ON LINE CLOSED: 0)No 1)Yes <0>
T) AUTOMATIC RESET: 0)No 1)Yes <0>
X) PREVIOUS LINE
Y) DISPLAY COMPLETE CONFIGURATION
Z) EXIT CONFIGURATION
(CR) NEXT LINE
Parameter values as shown in the table above represent the Factory
Default values.
Host Speed (A)
Shows the speed of the Host interface and is normally set up at
installation or automatically by the Host software. In some countries
the range may be restricted to the faster speeds.
Host Data Bits (B)
Shows the number of bits in a byte
Host Stop Bits (C)
Shows the number of stop bits in each byte.
Host Parity (D)
Shows the Parity of each data byte.
Host Security (E)
Shows the security being used by Host computer. (See section 3 for
more information).
Host Flow Control Security (F)
Shows the flow control being used by Host computer. (See section 3
for more information).
Printer Selected (G)
Shows which printer has been selected for connection on the Auxiliary
Port.
Note: ATL will only provide support for its own brand of Baudot or
ASCII Monitor Printers. The current Ascom Baudot Printer is known as
a model 1040 and the current Ascom ASCII Printer is known as a
model 1030. The Ascom ASCII Printer model offers the additional
benefit of printing with two font styles; thereby making is easier to
differentiate incoming calls from outgoing calls when looking at a
printout.
12