Ensemble Designs 7900 HD Up/Down/Cross Converter - Manual (Page 29)

Avenue Touch Screen Remote Configuration
The Avenue Touch Screen remote control menus for this module are illustrated and
explained below. Refer to the 7900 Parameter Table for a summary of available parame-
ters that can be set remotely through the menus illustrated. The Configuration
Summary gives tips and general background information on setting the parameters. For
more information on using Avenue PC, refer to the Avenue PC Control Application
Software data pack.
Parameter fields that are grayed out can indicate one of the following conditions:
• An option is not installed.
• The function is not active.
• The module is locked.
• The User Level set with Avenue PC is not accessible from the current User Level.
7900 Avenue Touch Screen Menus
The Vid In menuallows you to configure the following:
• Ref Source – use this control to set the reference input source.
Status reporting is provided for the following conditions:
• Input – indicates signal is present and equalized.
• WSS/AFD In – the Wide Screen Signal/Active Format Descriptions In indicator
displays the format of the input signal connected to the Video In BNC as one of the
following: None, Full Frame, Letter 14:9, Letter 14:9T, Letter 16:9, Letter
16:9T, Anamorphic, Pillar 4x3, Pillar 14x9, Unknown WSS, Unknown AFD.
• Reference – reports the status of the reference input as either No Reference,
Ref 525 Lock, Ref 625 Lock, or Ref TLS Lock.
7900-29
Model 7900 HD Up/Down/Cross Converter