Input menu – Ensemble Designs BrightEye 81 3G / HD / SD SDI to HDMI Converter User Manual
Page 13
www.ensembledesigns.com
BrightEye 81 - Page 13
81
3G/HD/SD SDI to HDMI Converter
Input Menu
The status indicators of the Input Menu are detailed below. Please refer to the Input Menu illustration
on the following page.
• Input – This provides a read-only status indication of input video presence. The video format
coming in on the BNC connector(s) is auto detected and reported here. BrightEye 81 supports
all of the 3G, HD and SD standards listed in the chart below.
3G
HD
SD
Other
3G 1080p/50
720p/50
SD 525
No Input
3G 1080p/59.94
720p/59.94
SD 625
Unknown
3G 1080p/60
720p/60
1080i/50
1080i/59.94
1080i/60
1080p/25
1080p/23.98
1080p/24
1080sF/25
1080sF/23.98
1080sF/24
Note: If the status indicator displays “Unknown,“ the unit is detecting an invalid or
incompatible input signal. If the status indicator displays “No Input,” BrightEye 81 is not
detecting any input signal. Check your cabling connections. When the Input status is
“No Input,” none of the Input LEDs on the front panel will be illuminated, and the Power LED
will be illuminated.
• Dual Link – This provides a read-only status indication as follows:
On – BrightEye 81 detects inputs on both the Dual Link A and Dual Link B BNCs.
Off – BrightEye 81 does not detect Dual Link inputs on the input BNCs.
• Embedded Audio – This provides a read-only status indication regarding embedded audio
presence as follows:
G1 – Embedded audio is present on Group 1 of the audio input.
G2 – Embedded audio is present on Group 2 of the audio input.
G1 G2 – Embedded audio is present on Group 1 and Group 2 of the audio input.
Four Sets of Dashes (-- -- -- --) – No embedded audio is present.
Note: Please see the Input Menu illustration on the next page.