Ensemble Designs BrightEye 54 Sync Generator and Test Signal Generator User Manual
Page 10
BrightEye 54 Sync Generator and Test Signal Generator
BrightEye 54 - Page 10
Slate
This control allows the identification slate on the test signal output to be turned
on and off. The content of the slate can be configured in the
Config menu in the
BrightEye Control application.
Tone
This control toggles the analog audio tone on and off. This applies to the analog
audio out, the AES out, and the embedded tone on the SDI out. Advanced
configuration of digital and analog audio reference levels is available in the
Config menu.
HD Sync
This control selects the HD Tri Level Sync standard. Select 1080i, 720p, 1080p, or
1080sF. This output also follows the output
Standard selected, either 525 or 625.
For more information, see the
FUNCTIONAL DESCRIPTION section at the
beginning of this manual.