H3C Technologies H3C S12500 Series Switches - Manual (Page 13)

10
NOTE:
On an S12504 switch, install at least one MPU, one interface card, and three switching fabric modules.
On an S12508 or S12518 switch, install at least one MPU, one interface card, and seven switching fabric
modules.
Figure 13 Slot requirements (for the S12504)
(1) MPU slots (with red edges) (2) LPU slots (with blue edges)
(3) Switching fabric module slots (with grey edges)
Figure 14 Slot requirements (for the S12508/S12518)
(1) MPU slots (with red edges) (2) LPU slots (with blue edges)
(3) Switching fabric module slots (with grey edges)
1
2
3