Euro-Pro TO297W - Manual (Page 4)

GETTING TO KNOW YOUR PIZZA OVEN OPERATING INSTRUCTIONS
Read all the sections of this booklet and follow all the instructions carefully.
Before Using Your Pizza Oven
1. Make sure that the pizza oven is
unplugged and the On/Off-Time
Control Knob is in the “Off” position.
2. Wash the wire rack, crumb tray and
pizza cutter in hot , soapy water or in
the dishwasher.
3. Thoroughly dry all the accessories
and re-assemble the pizza oven.
4. Plug the power cord into the electrical
wall outlet.
5. After re-assembling your pizza oven,
we recommend that you run the unit
at the highest temperature (450°F) for
approximately 15 minutes to eliminate
any packing residue that may remain
after shipping. This will also remove
all traces of odor initially present.
6. When cooking is complete, turn the
On/Off-Time Control Knob to the “Off”
position and remove the plug from the
electrical wall outlet.
Care & Cleaning
Warning: Be sure to unplug the
oven and allow it to cool before
cleaning.
Your pizza oven features a continuous
clean coating that automatically cleans
itself during normal operation. Any
spattering that occurs while cooking and
comes into contact with the continuous
coating is oxidized while the oven is in
operation. If desired, wipe the walls with
a damp sponge, cloth or nylon scouring
pad and mild detergent. DO NOT USE
STEEL WOOL SCOURING PADS,
ABRASIVE CLEANERS OR SCRAPE
THE WALLS WITH A METAL UTENSIL,
AS ALL OF THESE METHODS MAY
DAMAGE THE CONTINUOUS CLEAN
COATING.
All accessories should be washed in hot
soapy water or can be cleaned in a
dishwasher. The door can be wiped with
a damp sponge and wiped dry with a
paper or cloth towel. Clean the outside
with a damp sponge. DO NOT USE AN
ABRASIVE CLEANER AS IT MAY
DAMAGE THE EXTERIOR FINISH.
LET ALL PARTS AND SURFACES DRY
THOROUGHLY PRIOR TO PLUGGING
OVEN IN AND USING.
Please Note: Initial start-up operation
may result in minimal smell and smoke
(about 15 minutes). This is normal and
harmless. It is due to the burning of the
protective substance applied to the
heating elements in the factory.
Using Your Pizza Oven
You can use your Pizza Oven to cook
more than just pizza. It can be used to
make garlic bread, grilled sandwiches,
tuna melts, grilled vegetables, etc.
For best results, it is recommended to
pre-heat the pizza oven for 15 minutes
on 450
°F.
1. Set the temperature control to the
desired temperature.
2. Turn the On/Off-Time Control knob to
the desired time.
3. Preheat the oven.
4. Place the wire rack in the pizza oven.
5. Place the food on the wire rack and
slide the wire rack in. If you are
making vegetables or anything that
cannot be placed directly onto the
wire rack, you can use a small pan
that will fit into the oven.
1. Main Housing
2. Temperature Control Knob
3. On/Off – Time Control Knob
4. Power “On” Light
5. Door Handle 6. Tempered Glass Window
7. Crumb Tray
8. Air Vents
9. Wire Rack
10. Pizza Cutter
*Note: Illustrations may differ from actual unit.
Technical Specifications
Voltage: 120V., 60Hz.
Power: 1450 Watts
2
3