H3C Technologies H3C S10500 Series Switches - Manual (Page 62)

54
# Enter system view.
<Sysname> system-view
# Create a queue-based WRED table named queue-table1, and configure the drop parameters.
[Sysname] qos wred queue table queue-table1
[Sysname-wred-table-queue-table1] queue 1 low-limit 30 discard-probability 20
[Sysname-wred-table-queue-table1] quit
# Enter port view.
[Sysname] interface gigabitethernet 1/0/1
# Apply the WRED table to GigabitEthernet 1/0/1.
[Sysname-GigabitEthernet1/0/1] qos wred apply queue-table1
Displaying and maintaining WRED
To do… Use the command… Remarks
Display WRED configuration
information on the interface or all
interfaces
display qos wred interface [ interface-type
interface-number ] [ | { begin | exclude |
include } regular-expression ]
Available in any view
Display configuration information
about a WRED table or all WRED
tables
display qos wred table [ table-name ] [ |
{ begin | exclude | include }
regular-expression ]
Available in any view