Figure 2-6 – H3C Technologies H3C S5800 Series Switches User Manual
Page 13
Advertising
2-4
Figure 2-6 Install an LSW1BFAN (1)
4) Fasten the screws with a Phillips screwdriver until the fan tray is well seated in the chassis, as
shown in
.
Figure 2-7 Install an LSW1FAN (2)
Figure 2-8 Install an LSW1BFAN (2)
z
To avoid damaging the connectors on a fan tray and backplane, slowly insert the fan tray. If you
feel hard when inserting the fan tray, plug out the fan tray and insert it again.
z
If the captive screw cannot be tightly fixed, check the installation of the fan tray.
Advertising
This manual is related to the following products: