H3C Technologies H3C S5800 Series Switches - Manual (Page 11)

6
Installing and removing a power module
The installing and removing procedures of the LSVM1AC300 are
similar to the LSVM1DC300. This section takes the LSVM1AC300 for
example.
NOTE:
Before installation, make sure the power module model is as
required by the device. For more information about the device
requirements, see the installation guide of the device.
Installing the power module
To avoid bodily injury or device damage, follow the steps in Figure 3 to
install the power module.
Figure 3 Power module installation procedure
Step1 Put on the ESD-preventive wrist strap, making sure the strap
makes good skin contact and is well grounded.