Powering on the switch, Checking before power-on – H3C Technologies H3C S3600V2 Series Switches User Manual
Page 31
25
Step5
Click Properties in the HyperTerminal window to enter the Switch Properties dialog box. Click the
Settings tab, set the emulation to VT100, and then click OK.
Figure 35 Set terminal emulation in Switch Properties dialog box
Powering on the switch
Checking before power-on
Before powering on the switch, verify that:
•
The power cord is properly connected.
•
The power supply voltage meets the requirement of the switch.
•
The console cable is properly connected; the terminal or PC used for configuration has been started;
and the configuration parameters have been set.
Powering on the switch
The S3600V2 switches have the same Boot ROM display style. This document uses the Boot ROM output
on an S3600V2-52TP-PWR-EI switch as an example:
Starting......
************************************************************************
* *
* H3C S3600V2-52TP-PWR-EI BOOTROM, Version 105 *